Products
MENU
  • Electronic material
  • Insulating material / Industrial plastic
  • Epoxy cast resin electric device


HOME > Products >
Electronic material > High thermal conductive bonding sheet > AD-7200TY/CD-7200TY

Electronic material

AD-7200TY / CD-7200TY

λ=10W/mK

Bonding sheet

AD-7200TY

Resin Coated Copper

CD-7200TY
AD-7200TY CD-7200TY

 

Material composition

▲AD-7200TY

 

▲CD-7200TY

 

Specifications

＜Dimensions＞
Product code

Product dimensions

(mm)

AD-7200TY

CD-7200TY

510mm　×　510mm

340mm　×　510mm

and so on

 

＜Thickness＞
Product code

Insulation layer

(μm)

Covering film

(μm)

Tolerance

(μm)
AD-7200TY 120 38 120±20

 

＜Thickness＞
Product code

Insulation layer

(μm)

Covering film

(μm)

Copper foil

(μm)

Tolerance

(μm)
CD-7200TY 120 38 35 120±20

 

General properties of insulating layer
Test item Unit Treatment 7200TY Remark

Thermal conductivity

（Laser flash method）

 W/mK A 5 Insulation layer
Thickness of insulation layer μm － 120
Halogen free compliance － － ○

Glass transition temperature

(DMA)

 ℃ A 200
Coefficient of thermal expansion ppm/℃ α1 6
α2 36
Storage elastic modulus -40℃ GPa A 16
25℃ 15
125℃ 9.5
Handling ability － － ◎

Thermal conductivity

（TIM tester method）

 W/mK A 6 Aluminum base PWB material
Peel strength kN/m 35μm 1.1
70μm 1.1
150μm 1.1
Breakdown voltage kV

In oil

Vertical to layer

 4<
Solder limit sec

300℃

float

 300<
Volume resistivity MΩm C-96/20/65 6.1×106
Surface resistance MΩ C-96/20/65 2.0×108
Flammability ― UL-94 V-0 equiv.
The various above-mentioned data is measured value, and is not guaranteed performance.

 

Breakdown voltage

 

Test method:JIS C 2110

　Step up voltage at a rate of 500V a second up to breakdown.

Test piece size (Thickness)

　Aluminum plate=1.5mm,　　Insulation layer=120μm,　　Cu foil=35μm

Test condition

　Negative electrode=Alumimun plate　　Positive electrode=Cu foil(25mmφ)

　Impressed current =AC 　Leakage current=10mA
The above shows that AD-7200TY could withstand voltage up to　5600V on average even if it is very thin of 120μm.

 

Long term reliability

 

< 175℃ for 3000 hours >

The above shows the test result of AC-7200TY which AD-7200TY is coated as insulation layer on Aluminum plate's surface.Both Breakdown voltage and Peel strength are strong enough even after heat treatment of 175℃ for 3000 hours.

 

< -65℃ ⇔ 125℃ × 3000-cycle　>

The above shows the thermal cycle test result of AC-7200TY. Both Breakdown voltage and Peel strength are strong enough even after 3000-cycle of -65℃⇔125℃ .