HOME > Products > Insulating material / Industrial plasticto > RICOCEL > ES-3261A < Standard specifications
 |
Properties
| Prpduct code |
ES-3261A |
| Properties |
Heat
resistnce |
Weight loss after 300℃×120-hour treatment is less than 8%
Decomposition temperature(TG/TDA) of 5% loss is 430 degree C |
Excellent |
Drilling
workability |
Less burr,Less crack or Less Chipping at drilling process |
Good |
Static
diffusion
property |
When static charged objects have contact with RICOCEL,the static is dissipated relatively quickly without sparkling |
Excellent |
| Durability |
Past results of durability against over 10000-time of repetitive soldering. |
Excellent |
Chemical
strength |
Excellent chemical strength againt Flux or Pallet cleaner. |
◎
Excellent |
|
Dimension & tolerance
| Product code |
Nominal size
(mm)
|
Actual size
(mm)
|
Guaranteed size
(mm)
|
Standard thickness
(mm)
|
| ES-3261A |
1200×1000
2040×1200
|
1210×1010
2060×1220
|
1200×1000
2040×1200
|
3.0～15.0
|
*Length direction is defined as warp-direction of glass fabric.
*Dimensions are discribed as "Length × width" at the above table
*Customize size(Thickness or Dimension) is also available |
Warp dirction of glass fabric is RICOCEL's Length dirction |
▲Maximum standard dimension is 1.2m × 2.0m.
Best production yield can be achieved. |
Thickness & tolerance
| Product code |
Thickness
(mm) |
Tolerance
(mm) |
| ES-3261A |
3.0 |
3.0 ± 0.1 |
| 4.0 |
4.0 ± 0.1 |
| 5.0 |
5.0 ± 0.1 |
| 6.0 |
6.0 ± 0.1 |
| 8.0 |
8.0 ± 0.1 |
| 10.0 |
10.0 ± 0.1 |
| 12.0 |
12.0 ± 0.1 |
| 14.0 |
14.0 ± 0.1 |
| 15.0 |
15.0 ± 0.1 |
☆Product with customized thichness is also available |
■Recommended conditions for machining
Diameter
of
end mill |
Blade |
Feeding
speed |
Revolution |
Incision |
| Width |
Depth |
| φ |
－ |
mm/min |
rpm |
mm |
mm |
| 2 |
4 |
450 |
5000 |
1.0 |
2.0 |
| 3 |
4 |
400 |
4300 |
1.5 |
2.0 |
| 4 |
4 |
380 |
4000 |
2.0 |
2.0 |
| 6 |
4 |
380 |
3800 |
3.0 |
2.0 |
| 8 |
4 |
400 |
3200 |
4.0 |
2.0 |
| 10 |
4 |
400 |
3000 |
5.0 |
2.0 |
Please decide suitable condption refering to the above table.
In case of burr formation or delamination,plaese adjust the condition again.
Please choice the End Mills for Machining Center.
|
| |
