HOME > Products > Insulating material / Industrial plastic > Thermosetting resin laminates /Line-ups
> Glass woven & Glass nonwoven composite/Epoxy laminates ES-3753K(CEM-3)
Glass woven & Glass nonwoven composite/Epoxy laminates
ES-3753K(CEM-3.0)
 |
Application:Punching parts (Thin plate) Mechanical parts(Thick plate) |
| Test items |
Unit |
Thin plate
for punching application |
Thick plate
for mechanical application |
Electrical strength
(Vertical to layer) |
In oil 1 min. |
MV/m |
- |
13 OK |
Breakdown voltage
(Vertical to layer) |
In oil 1 min. |
MV/m |
- |
16～26 |
Electrical strength
(Parallel to layer) |
In hot oil |
kV |
- |
9 OK |
Breakdown voltage
(Parallel to layer) |
In hot oil |
kV |
- |
35～45 |
| Insulation resistance |
at RT |
MΩ |
107～108 |
107～108 |
| After heat treatment |
105～106 |
105～106 |
| Volume resistivity |
at RT |
MΩ-cm |
109～1010 |
109～1010 |
| After moisture treatment |
107～109 |
107～109 |
| Surface resistance |
at RT |
MΩ |
107～109 |
107～109 |
| After moisture treatment |
106～107 |
106～107 |
Dielectric constant
(1MHz) |
at RT |
- |
3.9～4.9 |
4.3～5.3 |
| After dipping treatment |
4.1～5.1 |
4.5～5.5 |
Dissipation factor
(1MHz) |
at RT |
- |
0.015～0.019 |
0.015～0.019 |
| After dipping treatment |
0.018～0.023 |
0.018～0.023 |
| Flexural strength |
Vertical to layer |
MPa |
200～500 |
250～350 |
| Parallel to layer |
- |
250～350 |
| Compressive strength |
Vertical to layer |
MPa |
- |
270～370 |
| Parallel to layer |
- |
240～340 |
| Tensile strength |
MPa |
- |
150～250 |
| Izod impact strength |
Parallel to layer |
J/cm |
- |
1.0～2.0 |
| Cleavage strength |
kN |
- |
7～10 |
| Rockwell hardness |
|
- |
M.100～110 |
M.100～110 |
| Water absorption |
1.5mm Thick |
% |
0.05～0.10 |
- |
| 10mm Thick |
- |
0.02～0.05 |
| Appearance after heating treatment |
2 hours |
℃ |
180 OK
(180) |
180 OK
(180) |
| Hot flexural strength retention |
% |
120℃ 30< |
120℃ 30< |
| Specific gravity |
- |
- |
1.80～2.00 |
| Tracking resistance |
DIN |
Drop |
- |
- |
| Acetone resistance |
- |
OK |
OK |
| Flame retardance |
UL |
- |
94V-0 |
(94V-0) |
| Arc resistance |
sec. |
130～150 |
130～150 |
| Tg |
DMA |
℃ |
|
140 |
*JRMA qualification
(*Japan Railway rollingstock & Machinery Association) |
- |
Flame retardant
(3mm thick) |
|
*The above figures show the standard properties and guaranteed value is showed in parentheses
*Test method : JIS K-6911 |
Specifications and dimension
| Thickness(mm) |
0.6～50 |
Standad dimension
(mm) |
1000×1000 |
◯ |
| 1000×1200 |
◯ |
| 1000×1500 |
|
| 1000×2000 |
|
| 1200×2000 |
|
Thickess
tolerance
(mm) |
|
|
| 0.5 |
|
| 0.6 |
±0.13 |
| 0.8 |
±0.15 |
| 1.0 |
±0.15 |
| 1.2 |
±0.20 |
| 1.5 |
±0.20 |
| 1.6 |
±0.23 |
| 2.0 |
±0.25 |
| 2.5 |
±0.30 |
| 3.0 |
±0.35 |
| 4.0 |
±0.40 |
| 5.0 |
±0.55 |
| 6.0 |
±0.60 |
| 8.0 |
±0.70 |
| 10.0 |
±0.80 |
| 12.0 |
±0.90 |
| 15.0 |
±1.10 |
| 16.0 |
±1.10 |
| 18.0 |
±1.30 |
| 20.0 |
±1.30 |
| 25.0 |
±1.40 |
| 30.0 |
±1.50 |
| 35.0 |
±1.60 |
| 40.0 |
±1.70 |
| 50.0 |
±1.90 |
| 75.0 |
|
100.0
|
|
|
| *Minimum quantity of order would be quoted according to product |
