HOME > Products > Insulating material / Industrial plastic > WOODLYTE
Insulation reinforced laminated wood "WOODLYTE"
70 years long-seller
WOODLYTE is the laminated wood made of Phenolic resin impregnated veneers
|
▲ WOODLYTE |
|
WOODLYTE is used for the following applications for more than 70 years.
|
Applications
- Rather large insulation parts required of mechanical strength.
- Insulation parts installed in oil
- Shaft of Live-line tools.
- Mechanical parts which must not be made of metal , and must have enough strength.
- In the case when general wood material can not meet hardness and strength requirement , or when must meet homogeneity requirement.
- Craft work which make use of woodgrain appearance of WOODLYTE.
|
▲Shaft of disconnect stick |
▲Disconnect bar of circuir breaker |
Properties
- Both Insulating property and Mechanical strength do not decay not only in Oil but also in the Air.
- Even after water soaking treatment ,insulating resistance recovers soon ,and further delamination ,warpage, or crack do not appear.
- Compared with Oil-impregnated-wood or Paraffin-impregnated- wood,so far excellent in Insulating property.
- With homogeneity of composition ,Mechanical strength or Water resistance is stable compared to the above wood.
- Excellent in Humidity,Heat and Chemical resistance.
- Buff finish gives graceful glaze to Wood grain appearance.
|
Recovery of Insulation resistance
after 24-hour water soaking treatment
|
Classification
WOODLYTE has a couple of types of products,"SS-type and AS-type",according to the way how veneers are laminated as follows.
| SS-type |
AS-type |
(Laminated Veneer Lumber) |
(Plywood) |
▲AS-type (Top) and SS-type(Bottom)
|
Round bar,Square bar or Long products are made by machining SS-type board.
WOODLYTE SS-tube ,which is made by winding SS-type board along grain direction ,is also available.
WOODLYTE SS-type board has the merit of being made into large area product and also has quality stability which is unaffected by grain directions.
|
Line ups
| Product code |
Properties |
ＷＬ－４００１
ＷＬ－４００５
(ＳＳ-type) |
Veneers are laminated in the same direction of wood grain one after another.
WOODLYTE bar and WOODLYTE tube (WL-4003) are made on the same method as decribed avove.
Specific gravity of WL-4001 is 1.2、and WL-4005 is 1.0. |
ＷＬ－４００２
ＷＬ－４００６
（ＡＳ-type） |
Veneers are laminated in each direction of wood grain one after the other.
AS-type products has the same performance in each (Length / Width ) direction
Large area products are available.
Specific gravity of WL-4002 is 1.2, and WL-4006 is 1.0. |
ＷＬ－４００３
（ＳＳ-type Tube） |
WOODLYTE SS-tube which is made by winding SS-type board along grain direction.
Specific gravity is 1.1。 |
ＷＬ－４２３１
（ＳＳ-type Round bar） |
WOODLYTE SS-bar which is made by winding SS-type board along grain direction.
Specific gravity is 1.1. |
|
Dimentions
| Product code |
Dimension (㎜) |
Standard
tickness （㎜） |
| Regular size |
ＷＬ－４００１
ＷＬ－４００５
(ＳＳ-type） |
340×1200 |
*3 |
3～100 |
ＷＬ－４００２
ＷＬ－４００６
（ＡＳ-type） |
900×900 |
|
3～100 |
| Custom size |
ＷＬ－４００１
ＷＬ－４００５
（ＳＳ-type） |
280×1850 |
|
20～80 |
| 280×2650 |
*1 |
20～80 |
| 900×900 |
*2,*3 |
3～80 |
ＷＬ－４００２
ＷＬ－４００６
（ＳＳ-type） |
1050×1050 |
|
5～100 |
| Tube |
ＷＬ－４００３ |
φ19, 22×φ28, 30, 32, 34, 36, 38 × 2000 |
| Round bar |
ＷＬ－４２３１ |
φ10, 12, 14, 16, 18, 20 × 1000 *4 |
*1.Veneers are jointed in order to meet specified dimension.
*2.Veneer are jointed in width direction in order to meet specified dimension.
*3.Veneers of width direction is inserted to every 10-layers of Length direction in order to make thick product.
*4.Diameter of bar is available in increments of 0.5mm up to 20mm.Customized diameter is also negotiable.
|
General properties
| Test items |
Condition |
Unit |
Treatment |
WL-4001 |
WL-4002 |
Withstand voltage
vertical to layers |
In oil / 1min |
MV/m |
C-90/20/65 |
12 |
12 |
Breakdown voltage
vertical to layers |
In oil |
MV/m |
C-90/20/65 |
17～24 |
15～23 |
Withstand voltage
parallel to layers |
In hot oil / 1min. |
KV/15㎜ |
O-0.5/90 |
20 |
20 |
Breakdown voltage
parallel to layers |
In hot oil |
KV/15㎜ |
O-0.5/90 |
35～45 |
30～40 |
| Insulation resistance |
at RT |
MΩ |
C-90/20/65 |
1×104～1×105 |
1×104～5×104 |
| Volume resistivity |
at RT |
Ω-㎝ |
C-90/20/65 |
5×104～5×105 |
5×104～5×105 |
| Surface resistance |
at RT |
Ω |
C-90/20/65 |
5×104～5×105 |
5×104～5×105 |
| Vending strength |
Vertical to layer |
Vertical to grain *1 |
MPa |
A |
230～290 |
150～200 |
| Parallel to layer |
Vertical to grain *1 |
MPa |
A |
200～250 |
100～150 |
| Compressive strength |
Vertical to layer |
|
MPa |
A |
110～150 |
200～230 |
| Parallel to layer |
Parallel to grain *1 |
MPa |
A |
200～250 |
100～150 |
| Vertical to grain *1 |
70～110 |
| Tensile strength |
|
MPa |
A |
98～150 |
78～140 |
| Charpy impact strength |
Parallel to layer
Vertical to grain *1 |
J/㎝2 |
A |
2.5～2.9 |
1.3～2.0 |
| Brinell hardness |
Vertical to layer |
HB |
A |
25～35 |
25～35 |
| Cleavage strength |
Parallel to grain *1 |
ｋＮ |
A |
3.9～5.4 |
3.9～5.4 |
| Water absorption |
％ |
C-24/50
+D-24/23 |
0.5～2.0 |
1.0～3.0 |
Appearance after 2-hour heating treament |
℃ |
A |
105℃
Not particular |
105℃
Not particular |
| Specific gravity |
－ |
A |
1.25～1.30 |
1.20～1.25 |
"*1"= data of WL-4001
The various above-mentioned data is measured value , and is not guaranteed performance.
Test method is JIS K 6911 and JIS K 7111.
Treatment：
A=Accept state C=Constant temperature and humidity D=Water soaking treatment E=Heating treatment O=Oil soaking treatment .Number means Time/Temperature/Humidity |
