(1)Machining pattern | ||
|
▲Appearance of test piece |
|
(2)Machining condition
|
▲DuraVertical(MORI SEIKI) |
||||||||||||||||||||||||||
(3)Test result |
|||||||||||||||||||||||||||
In general machining condition, Revolution speed is set high according to increase of Feed speed. In this machining workability test, Revolution speed was fixed at 3800rpm in order to impose machining-load on pallet material. ES-3261C has no delamination at lib-like part through high speed feeding of nearly 10,000mm/min. |